Transportation Precautions

1. Proper Packaging: Before shipping, ensure that the handheld laser welding machine is adequately packed with wooden frames and foam protection to prevent damage or collision during transit.

2. Moisture Protection: Take appropriate measures to prevent moisture or water damage during transportation, especially for sea transportation.

3. Secure on the Ship: Arrange the equipment in an appropriate position on the ship and use firm supports and restraints to prevent shaking and sliding during the journey.

Installation and Debugging Precautions

1. Environmental Check: Ensure that the welding machine is installed on a stable ground or support, in a dry and well-ventilated environment, and avoid dust and foreign objects from entering the equipment.

2. Power Requirements: Check the power requirements of the welding machine and ensure that the appropriate power voltage and current are provided.

3. Gas Source Preparation: If necessary, prepare the required protective gas and ensure a stable gas supply.

4. Safety Measures: Familiarize yourself with the safety operation manual of the welding machine before commissioning, and wear necessary personal protective equipment.

5. Parameter Settings: Set appropriate laser welding parameters, such as power, frequency, focal point position, etc., according to the welding task requirements.

6. Install Cooling System: Install the cooling device to cool the laser source. Connect the cooling system to the laser source using the correct accessories and pipes provided in the installation kit. Ensure all connections are secure and reliable. Connect all electrical and air connections to the machine and ensure their wiring and layout are correct. It may be necessary to hire an electrician or technician to handle electrical connections.

7. Welding Test Samples: Conduct welding test samples before formal welding to confirm that the welding quality meets the requirements.

8. Quality Inspection: During the commissioning stage, regularly inspect the welding quality and weld appearance, and make timely adjustments to parameters and equipment.

9. Operator Training: Ensure that the operators are familiar with the operation and safety procedures of the handheld laser welding machine and train them in the correct operation of the equipment.

10. Maintenance Plan: Develop a regular maintenance plan to keep the equipment in good condition and extend its service life.